AndCoat Brake Caliper Paint Kit - 500ml

Introducing our brand new AndCoat Brake Caliper Paint Kit - perfect for those who are keen on taking their DIY customization skills to the next level. With 13 different colour options, you're sure to find the perfect shade to suit your preferences.

Designed to refresh tired and faded brake calipers, and it comes with everything you need, including application instructions, preparation and application ancillaries. AndCoat Brake Caliper Paint is a primer and topcoat in one, made with urethane modified alkyd resins that contain rust-inhibiting pigments. It can be applied in temperatures as low as 5°C, making it a versatile option for any DIY project.

Our Brake Caliper Paint is unique in that it has a high volume solids content, which means that just a single coat can achieve a fresh look. As long as you carry out the correct preparation, our Brake Caliper Paint will be very durable and long-lasting.

The kit includes:

• Thoroughly clean, degrease and decontaminate brake calipers using the products provided in our kit.
• 500ml of Caliper Paint, enough to coat 4 calipers twice
• Methylated Spirits
• 4 x Brush selection
• Masking tape
• 400 Grit sandpaper
• Wire brush

How to Use

• Thoroughly clean, degrease and decontaminate brake calipers using the products provided in our kit.
• Sand down existing surface to remove any old or failed coatings and to provide a sufficient key to the brake caliper.
• Wipe down the surface with our pre-paint cleaner to remove any dust sanding dust particles and excess contamination. Wait to evaporate (at least 15 mins) prior to painting.
• If painting the calipers whilst on the car, mask up any areas you do not want to paint. You can remove the calipers for an full coating system if you wish.
• Apply one coat of our Brake Caliper Paint and allow to fully dry prior to road use. Touch drying time will be roughly 3 hours at 20°C and handling drying time will be 8 hours at 20°C. If you drive prior to this, there’s risk of brake dust and road contamination sticking to your fresh paint.
• Any defected areas / over spills – wipe away with solvent provided.

If you notice any defective areas or over-spills, simply wipe them away with the solvent provided. Keep in mind that for track use, you may notice fading in colour over a long period of time as the surface temperature of the brakes will increase dramatically.