Rust-Oleum Hard Hat 2255 Fluorescent Orange Topcoat - 500ml

Highly visible fluorescent orange aerosol topcoat for colour coding, signalling and safety-marking applications.

Rust-Oleum Hard Hat 2255 Fluorescent Orange creates a vivid matt finish that helps equipment, railings, signs and marked areas stand out clearly. For maximum colour brightness it should be applied over Rust-Oleum Hard Hat 2190 Flat White and it may be protected with Hard Hat 2500 Clear Topcoat where additional gloss and exterior durability are required.

Key features

• Highly visible fluorescent orange finish
• Designed for safety marking, signalling and colour coding
• Suitable for light industrial, normal-humidity and interior environments
• Touch dry in approximately 15 minutes at 20°C
• Can be handled after approximately 30 minutes
• Fully cured after approximately three days
• Theoretical coverage of approximately 2.1m² per 500ml aerosol at 25 microns dry film thickness
• Heat resistant up to 100°C in dry conditions
• Lead and chromate-free pigments

Application guidance

Apply over a clean, dry white substrate for maximum fluorescent brightness. Rust-Oleum Hard Hat 2190 Flat White is the recommended base. Remove dirt, grease, oil and contamination and lightly abrade sound existing coatings. Fluorescent colours can fade with UV exposure so exterior work should be protected with Rust-Oleum Hard Hat 2500 Clear Topcoat. Apply several thin layers and allow at least one hour before recoating.

Data sheets & Downloads

Rust-Oleum Hard Hat Fluorescent Topcoats – TDS