Andrews Aerosols
Andrews Worktop Restoration Kit - 7.5m2
Andrews Worktop Restoration Kit - 7.5m2
Couldn't load pickup availability
The Andrews Worktop Restoration Kit is a complete DIY coating system designed to transform worn or dated laminate worktops into durable, professional-looking surfaces - without the cost or disruption of replacement.
Perfect for kitchens, utility rooms, bars and commercial food prep areas, this water-borne system allows you to revitalise your worktops in just a weekend. The kit includes everything needed to prime, colour and protect your surface, with optional metallic flakes available for a contemporary stone-style finish.
No removal required. No major mess. Just clean, coat and protect.
Once finished with the 2-pack clear protective topcoat, your worktop will have a tough, long-lasting surface suitable for everyday use.
✔️ Cost-effective alternative to replacement
✔️ Contemporary Matt or Gloss finish
✔️ Optional metallic flake effect
✔️ Durable 2-pack clear protection
✔️ Water-based system throughout
✔️ Suitable for internal use
Surface Preparation
Proper preparation is essential for long-term adhesion.
- Clean thoroughly using mild detergent and water
- Remove all grease, dirt and contaminants
- Remove hardware such as handles and fixtures
- Mask surrounding areaa
- Sand evenly using 80–120 grit sandpaper to create a key
- Pay attention to edges and corners
- Wipe down with a lint-free damp cloth to remove sanding dust
-
Ensure the surface is fully dry before priming.
Technical Data
| Property | Details |
|---|---|
| Substrate | Laminate worktops |
| Finish Options | Matt or Gloss |
| System Type | Primer + Colour Coat(s) + 2 Pack Clear |
| Coverage | Up to 7.5m² per kit |
| Primer Recoat | 1 hour |
| Colour Recoat | 2 hours (at 20°C) |
| Clear Coat Mix Ratio | 2:1 (Base : Activator) |
| Clear Coat Induction Time | 5 minutes after mixing |
| Light Use | 48 hours |
| Full Cure | 5 days |
| Interior Use | Yes |
Directions for Use
Step 1 – Prime
- Stir primer thoroughly
- Apply to splashbacks first using brush
- Roll main surface from back to front
- Extend slightly onto adjacent areas to prevent missed joins
- Allow 1 hour drying time
- Lightly sand if required before colour coat
Step 2 – Apply Colour Coat(s)
- Apply first coat with brush and roller
- Allow 2 hours drying time at 20°C
- Apply second coat
Optional – Metallic Flakes
- Apply flakes while colour coat is still wet
- Sprinkle evenly across surface
- Do not mix flakes into paint
- Once dry, lightly remove loose flakes
Step 3 – Apply 2 Pack Clear Coat
- Mix at 2:1 ratio (Base to Activator)
- Stir thoroughly for minimum 3 minutes
- Do not over-whisk
- Allow 3-5 minutes induction time before use
- Apply evenly with brush and roller
- Re-roll in one direction for uniform finish
- Leave 48 hours before light use
- Allow 5 days for full cure
Application Instructions
Shipping & Returns
Shipping & Returns
This web site is owned by and operated on behalf of Andrews Coatings Ltd of Carver Buildings, Littles Lane, Wolverhampton, West Midlands, WV1 1JY.
These are the conditions of use of this web site. By viewing and using this web site you indicate your acceptance of these conditions and agree to be bound by them.
1. The material and information on this web site is directed solely at and is to be used only by persons who access it from within the United Kingdom. This web site, all its content and any contract brought into being as a result of use of this web site is governed by and construed in accordance with English law. The parties to any such contract agree to submit to the exclusive jurisdiction of the English courts.
2. The release, publication or distribution of the information contained on this web site in jurisdictions outside the United Kingdom may be restricted by law. Persons in a jurisdiction outside the United Kingdom from which this information is accessed, published or distributed should inform themselves about and observe such restrictions and are responsible for compliance with any local laws (to the extent that they may be applicable).
3. Although Andrews Coatings Ltd has taken reasonable care to ensure that the information on this web site is accurate, neither Andrews Coatings Ltd nor any of its employees or representatives make any warranty of any kind (expressed or implied) as to, or assume any legal liability for, (in each case to the extent permitted by law), the accuracy, completeness, currency or reliability of any information contained on this web site, nor do they accept any liability to keep the information contained on this web site up to date.
4. By accessing this web site you agree that, to the extent permitted by law, in no event shall Andrews Coatings Ltd nor any of its employees or representatives be liable for any loss or damage arising out of or in connection with the use of the information or hyperlinks available on this web site.
5. In the event that Andrews Coatings Ltd is held liable for any loss or damage, you further agree that Andrews Coatings Ltd will not be liable for any indirect, special or consequential loss or damage which arises from your use of the web site for any and all purposes or from reliance on any part of it.
6. Andrews Coatings Ltd reserves the right to revise this web site or withdraw access to part or all of it at any time.
7. Andrews Coatings Ltd have not reviewed, are not responsible for, do not endorse the content of, and accept no liability in respect of any information contained on any web site that is referenced by a link from this web site or which may be linked to this web site. Links to other web sites are provided for your convenience only. If you decide to access other web sites through any such link, you do so at your own risk and will be bound by any terms and conditions of use which that other site may impose on its users. Any dealings you may have with any third party are your responsibility and Andrews Coatings Ltd accepts no responsibility to assist in the resolution of any dispute which may ensue. Andrews Coatings Ltd will not be liable for any loss or damage which you may suffer as a result of your dealings with any third party.
8. The copyright in all web site design, text, graphics, the selection and arrangement thereof, and all software compilations, underlying source code, software (including applets) and all other materials on this web site is the intellectual property of Optimised Web Design or their technology providers. Any use of materials on this web site, including reproduction, modification, distribution or republication, without our prior written permission is strictly prohibited. All brand names used in the web site are trade marks or trade names of their respective holders. No permission is given in respect of the use of any of these names or titles and moreover any such use may constitute an infringement of the holders’ rights.
9. Should any of these conditions be determined to be illegal, invalid or otherwise unenforceable due to the laws of any state or country in which these conditions are intended to be effective, then to the extent and within the jurisdiction which that condition is illegal, invalid or unenforceable, it shall be severed and deleted from these conditions and the remaining conditions will survive, remain in full force and effect and continue to be binding and enforceable.
10. Nothing in these conditions affects your statutory rights.
Disclaimer
We endevour to keep all Data and MSDS (Material Safety Data Sheets) current and up-to-date on our website, however it is advised that you always speak with the office to ensure that you have the latest versions. Instructions for use and Safety Information should be be strictly adhered to at all times.
Share

Start your own aerosol brand here!
Offer your own great range of custom aerosols to build brand awareness and repeat custom. Low MOQ & our in house design team working with you to create a unique label for your new product. Get in touch if you'd like to find out more!
Using this kit has saved us thousands based on a quote we were given to replace our worktops and has been so effective at transforming our laminate counters into a hard-wearing colour that compliments our kitchen renovation. It was easy to use and is holding up fantastically, can be cleaned, and even though am avoiding doing so, hasn't marked when we put hot pans on it. Cannot recommend enough
Thank you so much for taking the time to leave such a thoughtful review! We're really glad to hear the kit helped you save money and made such a big impact on your kitchen renovation. It's brilliant to know it's holding up well and performing just as you'd hoped - even standing up to the occasional hot pan! We love hearing how our products make a real difference in our customers’ homes. Thanks again for your kind words, it truly means a lot to us.
Great price super delivery service and great product.
The kit has totally changed how our kitchen looks and it has given an expert finish. Followed the instructions and had a Question which Matt responded promptly too. Which was much appreciated. The methods of preparation and layering are easily completed as instructed and the anthracite grey , with silver flecks provided a professional finish. Thankyou.
Thank you for the review John! We're so glad you could give your worktop a new lease of life! Andrews Team